Installing a tiled backsplash in the kitchen is very easy DIY project. Backsplash adds a touch of style to the kitchen and protects the walls from the kitchen mess and mishaps. Backsplash is also quite easy to clean. Here are 10 tips for you to install tiled backsplash in the kitchen.
Firstly, before installation you should know how much tile is exactly needed. So calculate it on the basis of square footage of space. By reading the label on tile box, you will come to know how many square feet per box covers. Select a box as per your need.
Secondly, there are many things that are needed to install tiled backsplash. You need to make a list of them and buy it before installation. The things that are needed for installation are sufficient number of tiles, tile mastic or adhesive, tile nippers, a tile cutter, tile spacers, notch trowel, sponges, grout, grout float, silicone, grout sealer, pencil and level.
Thirdly, before installation, you need to make the surface ready. Scrape any flaking or cracked paint, remove any high gloss paint or any wallpaper. Clean it thoroughly with spray cleaner and then allow it to dry.
Then, don’t forget to set the guidelines. Have a look at the backsplash area. Visualize the center and mark it. Make use of the level and draw a vertical line few inches away from the mark. The first tile is to be laid on the vertical line. Leave 1/8 inch in between the countertop and tile bottom. The gap is to be filled up with silicone afterwards.
Now, the tile is to be applied. Spread mastic or adhesive over the area of about four tiles. Drag the notched trowel through adhesive to create ridges. Set a tile to the adhesive and press it. Insert the tile spacers if the tile does not have the self spacers to the adhesive closely against set tile. Spread mastic to the small areas with the progress of your job and remember to wipe off the adhesive on tile surfaces when it is wet.
Next, make use of tile cutter for fitting tiles. You can also make use of nippers to cut out odd shapes and curves of the tiles. The tile backsplash should be allowed to dry completely.
Again, don’t forget to apply grout. Get away with spacers after the adhesives dry up. You should wear the rubber gloves while dealing with grout. After mixing the grout, spread it all over tiled surface with grout float. However, the surface of the tile should be kept clean.
So, cleaning up is important point which should never be neglected and taken proper care of. When grout becomes hard wipe the surface by using damp sponge. Clean grout lines with gloved fingertip. When tile dries up, buff up vigorously with a cotton T-shirt.
Sealing the grout is also an important point that should be considered while installation. The sealer helps to keep away the moisture from the grout and thus helps in protecting its color. Lastly, don’t forget to fill up the gaps with silicone.
Showing posts with label kitchen granite counters. Show all posts
Showing posts with label kitchen granite counters. Show all posts
Monday, July 6, 2009
10 Tips To Install A Tiled Backsplash In Your Kitchen
Interior decoration is not an easy job. One needs to plan well before starting the home designing or development project. Many factors should be considered before taking any decision. We need to decorate each and every area with great effort. Kitchen is one of the important parts of our house that we need to decorate. The materials required for the decoration of the kitchen should be selected at first.
Many types of materials are available on the market. But you need to select the product that is stylish and durable in nature in order to give that perfect look to your kitchen. Countertops, backsplash, cabinet are the most common items seen in the kitchens. Selection of the right material is essential for the perfect tile installation. You need to do proper research before starting the kitchen renovation and designing project. The color of the tiles should match well with the color coding of the interior. After selecting the material, you need to install it in a proper way.
Before installing a tiled backsplash you need to consider some of the important factors. The square foot area, where you are willing to place the marble, should be measured properly so that tiles fit well. You can check out the number of tiles, inside the box, from the label that is attached to the box. Enough tiles should be ordered for installing a tiled backsplash. You will need mastic or adhesive tile, tile nippers, tile cutter or tile scrubber for installing the tiled backsplash in your kitchen. In addition to that, grout, sponges, grout float, silicone, grout sealer, pencil grout float are also required for completing the installation job. For applying mastic, notched trowel is needed. There are ten valuable tips to help you in installing the backsplash easily.
1. First, you need to prepare the surface to ensure smooth tile installation. High gloss paint, wallpaper should be removed from the surface. Flaking or cracked paint should also be removed.
2. Next, the floor should be cleaned thoroughly with a spray cleaner and should also be dried.
3. Then, you need to mark the area with a pencil. The leveling and marking should be done properly so that the tiles fit well.
4. After marking the area, you need to spread the mastic or adhesive tiles on the surface. Drag the trowel to form ridges. The tiles should be placed carefully.
5. Then use a tile cutter or tile scriber to fit tiles where required.
6. After that you need to apply grout. Spacers should be removed after drying the adhesive tiles. You need to wear rubble gloves while applying grouts.
7. Wipe the surface with a damp sponge and then you need to clean up the grout lines.
8. Then the grout should be sealed properly. By applying sealer you can protect the colors and beauty of the tiles.
9. After sealing it you need to fill the gaps by using Silicone.
10. You can get more information on tiled backsplash installation from the net.
Backsplash installation in your kitchen is not at all a difficult job. You can give a new look to your kitchen by adding tiled backsplash. The best part is that you can install it yourself and therefore it will save money. Custom, backsplash is a great option. It not only adds beauty and style, but also protects your kitchen walls from mishaps. Moreover, you can easily maintain and clean the backsplash. It can be made of many materials, like, granite, stainless steel, wood and many more. But installation of wood, granite steel backsplash is not an easy job. You need to hire a professional for this purpose. Glass or ceramic tile is a great option, if you are wiling to install it yourself. It can add beauty and elegance to any structure. You can give a stylish look to your kitchen by adding this item.
Many types of materials are available on the market. But you need to select the product that is stylish and durable in nature in order to give that perfect look to your kitchen. Countertops, backsplash, cabinet are the most common items seen in the kitchens. Selection of the right material is essential for the perfect tile installation. You need to do proper research before starting the kitchen renovation and designing project. The color of the tiles should match well with the color coding of the interior. After selecting the material, you need to install it in a proper way.
Before installing a tiled backsplash you need to consider some of the important factors. The square foot area, where you are willing to place the marble, should be measured properly so that tiles fit well. You can check out the number of tiles, inside the box, from the label that is attached to the box. Enough tiles should be ordered for installing a tiled backsplash. You will need mastic or adhesive tile, tile nippers, tile cutter or tile scrubber for installing the tiled backsplash in your kitchen. In addition to that, grout, sponges, grout float, silicone, grout sealer, pencil grout float are also required for completing the installation job. For applying mastic, notched trowel is needed. There are ten valuable tips to help you in installing the backsplash easily.
1. First, you need to prepare the surface to ensure smooth tile installation. High gloss paint, wallpaper should be removed from the surface. Flaking or cracked paint should also be removed.
2. Next, the floor should be cleaned thoroughly with a spray cleaner and should also be dried.
3. Then, you need to mark the area with a pencil. The leveling and marking should be done properly so that the tiles fit well.
4. After marking the area, you need to spread the mastic or adhesive tiles on the surface. Drag the trowel to form ridges. The tiles should be placed carefully.
5. Then use a tile cutter or tile scriber to fit tiles where required.
6. After that you need to apply grout. Spacers should be removed after drying the adhesive tiles. You need to wear rubble gloves while applying grouts.
7. Wipe the surface with a damp sponge and then you need to clean up the grout lines.
8. Then the grout should be sealed properly. By applying sealer you can protect the colors and beauty of the tiles.
9. After sealing it you need to fill the gaps by using Silicone.
10. You can get more information on tiled backsplash installation from the net.
Backsplash installation in your kitchen is not at all a difficult job. You can give a new look to your kitchen by adding tiled backsplash. The best part is that you can install it yourself and therefore it will save money. Custom, backsplash is a great option. It not only adds beauty and style, but also protects your kitchen walls from mishaps. Moreover, you can easily maintain and clean the backsplash. It can be made of many materials, like, granite, stainless steel, wood and many more. But installation of wood, granite steel backsplash is not an easy job. You need to hire a professional for this purpose. Glass or ceramic tile is a great option, if you are wiling to install it yourself. It can add beauty and elegance to any structure. You can give a stylish look to your kitchen by adding this item.
Wednesday, July 1, 2009
FAQ On Stone Murals
1. Name the type of tiles used to make stone murals?
One can use different types of tiles to make stone murals. Glass, porcelain, ceramic, tumbled stone and marble tiles are generally used to make murals. A homeowner can contact the home remodeling experts to find the tile that will suit his budget and style.
2. Where can a person install the stone murals?
Stone murals are used to redefine the aesthetic value of the house. They can be used both for the interior and exterior decoration of a house. Depending on his choice, one can install stone murals behind the bed, on the hallways, floors, ceilings, shower walls and backsplashes. It can be added anywhere in the house to add elegance.
3. Can one use stone murals outside the house?
Yes, it can be used outside the house. To use stone murals for the exterior decoration of a house, one needs to use a mural that has been kiln fired at a temperature of at least 1600 degrees. Generally, the companies do not offer such murals and so it might be a bit difficult for a person to find such murals. Kiln fired murals needs some specialized technology and companies with this technology can only offer such murals. Stone murals which come only with UV coating gets faded when they are exposed to sun and other elements. It is better to use porcelain or ceramic for outdoor purposes as most of the stones get faded after a certain period of time.
4. Can someone place the kiln fired tiles in the swimming pools?
Yes, the kiln fired tiles can be placed in the swimming pools. The process of kiln fired is meant for such purposes.
5. In what form does the stone mural come to the customers?
The stone murals and all other kind of murals are delivered to the customers in an unassembled form. Most of the companies which sell murals give one detailed grid that guides a person with the ways that one should use to assemble and install the murals. As the detailed process is given by the companies, one can install the mural easily to any part of the house.
6. Can a person order stone murals of any size?
Yes, a person can order any size of stone murals depending on his requirement and budget. Some people orders murals with four tiles while the other orders for murals with five hundred tiles. It is based on the space that is available for installing the mural. Whatever be the size, the image can be done easily. Some of the reputed mural companies offer murals in unique custom size.
7. Can someone order a mural with the pictures of his choice?
Yes, one can get a mural painting with picture of his choice. Most of the reputed companies can make murals depending on the choice of a person. One can give the photographs of his wedding to make a mural. Such pictures add a unique appeal to the house.
One can use different types of tiles to make stone murals. Glass, porcelain, ceramic, tumbled stone and marble tiles are generally used to make murals. A homeowner can contact the home remodeling experts to find the tile that will suit his budget and style.
2. Where can a person install the stone murals?
Stone murals are used to redefine the aesthetic value of the house. They can be used both for the interior and exterior decoration of a house. Depending on his choice, one can install stone murals behind the bed, on the hallways, floors, ceilings, shower walls and backsplashes. It can be added anywhere in the house to add elegance.
3. Can one use stone murals outside the house?
Yes, it can be used outside the house. To use stone murals for the exterior decoration of a house, one needs to use a mural that has been kiln fired at a temperature of at least 1600 degrees. Generally, the companies do not offer such murals and so it might be a bit difficult for a person to find such murals. Kiln fired murals needs some specialized technology and companies with this technology can only offer such murals. Stone murals which come only with UV coating gets faded when they are exposed to sun and other elements. It is better to use porcelain or ceramic for outdoor purposes as most of the stones get faded after a certain period of time.
4. Can someone place the kiln fired tiles in the swimming pools?
Yes, the kiln fired tiles can be placed in the swimming pools. The process of kiln fired is meant for such purposes.
5. In what form does the stone mural come to the customers?
The stone murals and all other kind of murals are delivered to the customers in an unassembled form. Most of the companies which sell murals give one detailed grid that guides a person with the ways that one should use to assemble and install the murals. As the detailed process is given by the companies, one can install the mural easily to any part of the house.
6. Can a person order stone murals of any size?
Yes, a person can order any size of stone murals depending on his requirement and budget. Some people orders murals with four tiles while the other orders for murals with five hundred tiles. It is based on the space that is available for installing the mural. Whatever be the size, the image can be done easily. Some of the reputed mural companies offer murals in unique custom size.
7. Can someone order a mural with the pictures of his choice?
Yes, one can get a mural painting with picture of his choice. Most of the reputed companies can make murals depending on the choice of a person. One can give the photographs of his wedding to make a mural. Such pictures add a unique appeal to the house.
Subscribe to:
Posts (Atom)